|
AVM
(Anti-Vibration Magic)
by
UNIKO
Your Hi-Fi system will
come alive
“Powerful”  “Amazing”
“Incredible”
Are comments from the AVM users!
|
| |
To dampen and
absorb undesirable and harmful mechanical vibrations, which
generate audible or visible Microphonic distortions in any
high-end audio, or video system.
|
|
Sound greatly improved in areas of
: Musicality, less aggressiveness, refinement, details, transient
clarity, inter-transient silence, sound-staging clarity, imaging
solidity and third dimension, blacker background, overall sound
density and richness, 3-D sensation, time and temporal coherence,
taming ‘hot’ system sound, power, dynamic contrast and grading ,
temporal and frequency smoothness, etc. Carrying no negative sonic
effect.
Video quality also greatly improved in areas of : More solid and saturated
color, coherence in color, blacker and smoother blacks, richer tones,
more 3D feeling, more details, smoother pictures, more natural skin
tones, ……Dynamic
contrast, depth, layering, ….. etc.
Please do expect ‘huge’ overall improvements.
|
|
Coat a thin layer on the following:
(for audio system)
- Small vacuum
signal tubes (in a ¼ inch width ring along the middle)
- Transformers
- Wires (such as interconnects, digital cables, power
cables, speakers cables, etc.)
- CD and DVD discs tops
- Speaker driver
brackets/cabinets/crossover networks/internal wiring, Circuit
boards/internal wires,
- Equipment chassis
- Equipment partition metal
panels
- Heat sinks
- Active or passive components
- Analog turntable
mats/platforms/platters/cartridges/ tonearms/motors/power supplies
- CD
transports/DAC/dejitterizers
……………. and on any parts
or equipment subject to internal or external vibrations.
In general, AVM can
also be applied to the internal video and audio cables, circuit
boards, transformers, fuse, capacitors, motor, fan frame/support of
the following:
- Front & rear projection systems
- Plasma/ LCD/ DLP TV & Display
- Satellites Receives
- Digital cameras
- 3G Mobile Phones
- Back of the satellite dish
- DVD Players
- And other mechanical devices
(for video system) video
and audio cables, motor and fan frame/support, and internal wire
in a front projection systems, Satellite Dish….. etc.
|
Non-toxic, flame-retardant,
semi-fluid, can be washed off with water right after application or
scraped off after drying, dries in minutes, self adhesive like glue,
easily applied, in various colors, virtually no odor, non-eatable or
drinkable (seek medical help immediately if swallowed or inhaled by
mistake).
|
Exotic, high-tech like materials, proprietary.
Patent
pending.
|
Supplier is
not responsible for any harmful medical consequences as a result
of improper or wrongful applications, not recommended as above.
|
|
Manufacturers: AVM can be sprayed onto
equipment. It will result in a better coverage,
hence
improvement on quality, and appearance |
|
Recommended
Procedure For Applying AVM |
|
1.
Tubes &
Transistors, Preamps and Power amps |
|
Coat a thin layer on the back of the circuit boards, soldering
points, transformers, internal wires, capacitors, fuse.
|
Coat a thin layer on the speaker driver
brackets, crossovers, capacitors, resistors, internal wires,
inside cabinet, soldering points.
|
Coat a thin layer on the back of
the circuit boards, soldering points, transformers,
internal wires, capacitors and fuse.
|
Coat
a thin layer on the back of the circuit boards, soldering points,
transformers, internal wires, capacitors and fuse.
|
Coat
a thin layer on the back of the circuit boards, soldering points,
transformers, internal wires, capacitors and fuse.
|
|
6.
Televisions/LCD/DLP/PLASMA/Front and Rear projection Video Systems |
|
Coat
a thin layer on the back of the circuit boards, soldering points,
transformers, internal wires, capacitors and fuse.
|
Coat
a thin layer on the back of the circuit boards, soldering points,
transformers, internal wires, capacitors and fuse..
|
|
Coat a thin layer on the back of the satellite dishes and the
video cables.
|
|
Coat the ring (with the width of approximately 10mm) at the top,
middle and bottom of the signal tubes.
|
|
10.
Power Cables, Interconnects, Speakers Cables, Video Cables |
|
Coat a thin
layer on the conductor and PVC jacket, then cover with sleevings
for better appearance.
Coat a
thin layer on the transformer, then apply shielding for
better appearances.
Coat a
thin layer on the capacitors, then apply shielding for
better appearances.
|
Coat a
thin layer on the glass of the fuses
|
Coat a thin layer on the resistors.
|
Coat a
thin layer on the equipment Chaises.
|
Coat a thin layer on the internal wires
and the covers.
|
Coat a thin layer (with a width of approximately 10mm) on the
covering of the CD & DVD discs. Position the coating on the first
track and the last track of the disc.
|
|
|
|
|
|
|
|
Note: Do not
dilute AVM with water or any solutions. First depower the electronic component, where applicable. In each of the
above case, please allow time (half an hour or more) for the AVM
to dry
before reinstallation or operation.
Disclaimer:
Users are responsible to decide if the application of AVM will
void equipment warranty. Supplier is not responsible for any
damages as a result of AVM application.
|
Manufacteres can contact Uniko directly
UNIKO ELECTRONICS INC.
14225 Stony Plain Road,
Edmonton, Alberta, CANADA
T5N 3R4
Tel: (780) 429-4011
Fax: (780) 420-6961
E-mail: ban@accentusaudio.com |
|
|
